Problem z dyskiem SATA podczas instalacji

SATA RAID Driver is for users who plan to install Windows OS on SATA / SATAII HDDs with RAID functions. To use RAID functions, you need to make a SATA RAID Driver floppy diskette before you install the operation system, such as Windows XP. If you do not plan to use RAID functions, it is not necessary to make a SATA RAID Driver floppy diskette. Please follow below steps for the usage of SATA RAID Driver:   1.      Copy the SATA RAID Driver from our website to your SATA HDDs. Unzip it, and copy all the files and folders to an empty diskette.   2.      Make sure that the “SATA Operation Mode” option in BIOS setup is set to RAID mode.   3.      Install Windows OS to your system. At the beginning of Windows setup, please press F6 and insert the SATA RAID Driver floppy diskette you just made. Then you are allowed to select the required driver to install after your system reading the SATA RAID Driver floppy diskette.   4.      After Windows OS installation, use the RAID tool in our support CD to configure RAID arrays under BIOS or Windows environment.For the details of RAID operation procedures, please refer to our user manual in the support CD or quick installation guide for further information.

Install driver during Windows XP installation   0. After you unpack driver, please copy files under subdirectory      SATA50XX to the root directory of floppy diskette (called driver      diskette).      Therefore, in root directory of floppy diskette you will see:      (1) Files "disk1" and "txtsetup.oem",      (2) Directory "win98_me", "win_nt", "win_2000", "win_xp" and related          driver files in each directory.      (please refer to "Driver File List" as below)   1. Booting from CD-ROM, when the Windows XP Setup blue screen      appear and prompt user to Press F6 if you need to install third      party SCSI or RAID driver, please press F6 key:   2. The setup program will continue, later when the setup program      prompts user to specify additional adapters, please press S      Key.   3. Then the setup program will prompt user to insert the driver      diskette. Please insert the driver diskette, then press ENTER       to continue;   4. The follow-up window will list out the installation choices,       please select ALi ALi SATA/RAID Controller for Windows XP       and press ENTER to continue;   5. The follow-up window will list out the devices to be installed,      in which selected ALi controller(s) should be included;   6. Repeat step 2, but select ALi ATA/RAID Controller at step 5;      If both controllers are installed, go to next step;   7  If users want to install other devices, please operate at this time.       If all devices have been successfully installed, please go to next       step.   8. Press ENTER to continue Windows XP setup.

Hmm...co do zworek...przekręcałem je metodą prób i błędów i nic dalej nie wykrywa HDD, a w jednej pozycji to pokazało się takie coś:
http://img58.imageshack.us/img58/7412/bios17qk8.jpg

Witam; to jest tak kupiłeś dysk a w cenie sprzedający musi uwzględnić montaż dysku, a tobie każą płacić 50zł.
Na dodatek kupując nagrywarkę należało, pójść z komputerem do sklepu a tak teraz o oni ci liczą jak byś nagrywarkę kupił gdzieś indziej. A ku przestrodze innym jak nie wiecie jak instaluje się dyski nagrywarki itp. rzeczy należy korzystać przy zakupie z pomocy tych co sprzedają ostatecznie to oni biorą kasę, a nie udawać że wszystko się wie, a potem są problemy.
Ja na pewno tak postąpię, dlatego szykuj 50zł i niech ci zainstalują, bo jeszcze komputer zepsujesz.